Hydraulic Tunnel Thruster 360 kg

Hydraulic Tunnel Thruster 360 kg


Velg variant
Light duty thrust up to (kg • lbs) 360 • 759
Heavy duty thrust up to (kg • lbs) 270 • 567
Typical boat size (ft • m) 59' - 108' • 18 - 33
Tunnel I.D. (mm • in) 300 • 11.8"
Propulsion system Twin Counter-Rotating
Hydraulic power up to (kW • hp) 27 • 37
Weight (kg • lbs) 26 • 57.3
Item Code SH360/300TC-xxx

Weight stated include thruster, props and bellhousing ONLY.

Weight of hydraulic motor (typical 25 - 40 kg) comes in addition.

Side-Power PROportional


A PROportional speed controlled thruster system allows for more precise handling of the boat in all conditions, applying only the necessary power needed to complete your maneuver confidently. By limiting the power under normal weather conditions, noise levels are significantly reduced.

The system also includes a practical HOLD-function in a twin thruster system. With a single press of a button, the bow and stern thruster will keep you alongside the docks - making single handed docking very easy indeed! Proportional thrusters are also the best choice for joystick interaction.

Side-Power S-link™


S-link™ is a CAN-based control system with full intelligent communication between all units in the system, much like a computer network.

  • Round, compact and waterproof connectors with unique keying and color coding to avoid faulty hookup
  • Unlimited number of commands or information transferred on a single cable
  • User feedback at panel
  • Intelligent troubleshooting

Side-Power Q-prop™


The new 5 blade special skew propellers are the result of over 2 years of development work and thousands of tests. They have been designed to reduce the noise level, while maintaining the exceptional efficiency of the old 4 blade Side-Power propellers. This goal was achieved, and we even chose to make them a little bit more aggressive on some models, increasing the thrust on some thrusters about 5%. Please see individual information on each new thruster for more details.

  • Noise reductions of up to 75% measured in controlled environments
  • The expected and tested normal noise reduction in average installations: 20-40%
  • Will be delivered on all Side-Power models except models with 300mm and 385mm tunnel diameter
  • Upgrade kits are available for most SP series thrusters with special adaptors

Side-Power Twin Counter-Rotating

Twin Counter-Rotating Propellers

Two counter-rotating propellers can give the most thrust at a good performance ratio in a minimal tunnel diameter. This system is used in our larger thrusters for maximum power. The TC models are the favourite thrusters among leading boatbuilders for their high-end yachts.

Side-Power Sealed Drive Lifetime Lubricated

Sealed and lifetime lubricated gearleg

Sealed gearleg with long-life "mechanical" seal where highly polished ceramic and carbon surfaces form the only moving sealing surfaces, ensuring protection against damaging water intrusion into the gear leg. Pre-filled with special gear oil for lifetime lubrication.

  • "Mechanical" seals with surfaces of ceramic and carbon for ultimate security against water intrusion
# Description Product
1 Motorbrakett 141315
2 Oiltank bracket 6 1031
3 Hose clamp 6 1043
4 Oiltank tag
5 Oiltank 6 1030
6 Oilhose 6 1042
7 Adapterplate BA23 SM-141871
8 DIN 912 - M10 x 60 11160
9 DIN 912 - M12 x 50 11250
10 Spring Washer 212128
11 Washer 212125
12 Washer 210125
13 DIN 128 - A10 10 1363
14 Rexroth motor 72100/BA23
15 Gear Case SM-135546
16 DIN 912 - M10 x 60 11160
17 Spring Washer 210127
18 Washer 210125
19 DIN 912 - M6 x 30 20 1172
20 Alu anode 10 9998
21 Washer 50 1181
22 Hex Nut 10 1260
23 Q-Prop ‘300 LH SM-136044
24 Q-Prop ‘300 RH sm-141858
25 Propell boss maskinert SM-136043
26 Flex. coupl. CFA8-‘24/SAE-C 10 5008-24-C14

The installer alone has responsibility for the installation of the spare parts. Side-Power only warranty the spare parts supplied only.

The information given in the document was correct at the time it was published. However, Sleipner Motor AS can not accept liability for any inaccuracies or omissions it may contain. Continuous product improvement may change the product specifications without notice. Therefore, Sleipner Motor AS can not accept liability for any possible differences between product and document.

Fil Type Språk Last ned
Installation Manual, SH (SH360).pdf Manual English  Last ned
User Manual, SH (SH).pdf User Manual English  Last ned
CAD-filer og tekniske tegniner

3D-modeller og tekniske tegninger
for designere og båtbyggere

Hos Sleipner har vi delt vår kunnskap og teknologi med ingeniører og båtbyggere i over hundre år. Nå kan du også få tilgang til vårt CAD bibliotek med .cad, .igs, .dwg, .stp, .xt, .pdf filer og mer.

Få tilgang til 1000+ CAD-filer